Thông thường khi bạn muốn nâng cấp os version của các thiết bị Nexus lên phiên bản cao hơn đồng nghĩa bạn phải upgrade luôn BIOS của nó. Ví dụ như Nxos version 7 thì BIOS bạn cần cũng phải ở phiên bản 4.0 trở lên.
Bây giờ mình sẽ demo upgrade thiết bị Nexus 3064 có BIOS version 1.7.0 lên 2.6.0 như sau. Trước tiên hãy check version thiết bị trước khi upgrade.
matbaoCA-sw01# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 1.7.0
loader: version N/A
kickstart: version 6.0(2)U6(7)
system: version 6.0(2)U6(7)
Power Sequencer Firmware:
Module 1: version v1.0
SFP uC: version 2.12
BIOS compile time: 10/14/2013
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U6.7.bin
kickstart compile time: 7/28/2016 9:00:00 [07/28/2016 16:40:23]
system image file is: bootflash:///n3000-uk9.6.0.2.U6.7.bin
system compile time: 7/28/2016 9:00:00 [07/28/2016 17:12:38]
Hardware
cisco Nexus 3064 Chassis ("48x10GE + 4x40G Supervisor")
Intel(R) Celeron(R) CPU P4505 @ 1.87GHz with 3665240 kB of memory.
Processor Board ID FOC18340FJ7
Device name: matbaoCA-sw01
bootflash: 1966080 kB
Kernel uptime is 0 day(s), 0 hour(s), 2 minute(s), 33 second(s)
Last reset
Reason: Unknown
System version: 6.0(2)U6(7)
Service:
plugin
Core Plugin, Ethernet PluginMình sử dụng usb để upgrade, usb của mình sẽ chép sẵn file image, kickstart. Hãy cắm usb vào thiết bị và show các file có trên usb bạn sẽ thấy đã có file image và kickstart.
matbaoCA-sw01# dir usb1:
65536 Nov 15 08:03:00 2022 .Spotlight-V100/
4096 Nov 15 08:03:20 2022 ._n3000-uk9-kickstart.6.0.2.U6.3a.bin
4096 Nov 15 08:03:42 2022 ._n3000-uk9.6.0.2.U6.3a.bin
65536 Nov 15 08:03:00 2022 .fseventsd/
65536 Nov 14 20:20:12 2022 System Volume Information/
37853184 Nov 14 16:59:00 2022 n3000-uk9-kickstart.6.0.2.U6.3a.bin
206762702 Nov 14 16:59:26 2022 n3000-uk9.6.0.2.U6.3a.bin
Usage for usb1://sup-local
250413056 bytes used
4042129408 bytes free
4292542464 bytes totalBạn có thể show các file trong bootflash, ở trong bootflash cũng có 2 file kickstart và image. Mình sẽ sử dụng lệnh copy 2 file này từ usb sang bootflash thay thế cho 2 file cũ.
matbaoCA-sw01# dir bootflash:
4096 Mar 07 07:01:45 2018 .patch/
0 Oct 10 08:49:51 2022 20221010_084951_poap_3972_init.log
0 Oct 11 05:51:44 2022 20221011_055144_poap_3937_init.log
0 Nov 14 03:08:03 2022 20221114_030803_poap_3936_init.log
0 Nov 14 08:22:17 2022 20221114_082217_poap_3936_init.log
0 Nov 14 10:54:20 2022 20221114_105420_poap_3936_init.log
37861376 Dec 21 12:35:13 2016 n3000-uk9-kickstart.6.0.2.U6.7.bin
205813793 Dec 22 04:50:28 2016 n3000-uk9.6.0.2.U6.7.bin
1024 Oct 10 08:48:50 2022 sprom_cstruct_2_0_0
1024 Oct 10 08:49:24 2022 sprom_cstruct_3_0_0
4096 Aug 18 15:21:43 2022 vdc_2/
4096 Aug 18 15:21:43 2022 vdc_3/
4096 Aug 18 15:21:43 2022 vdc_4/
4096 Aug 18 15:21:46 2022 virtual-instance/
Usage for bootflash://sup-local
371863552 bytes used
1481252864 bytes free
1853116416 bytes totalSử dụng lệnh đưới để copy file kickstart.
matbaoCA-sw01# copy usb1:/n3000-uk9-kickstart.6.0.2.U6.3a.bin bootflash:
Copy progress 100% 37853KB
Copy complete, now saving to disk (please wait)...Và lệnh này để copy file image.
matbaoCA-sw01# copy usb1:/n3000-uk9.6.0.2.U6.3a.bin bootflash:
Copy progress 100% 206762KB
Copy complete, now saving to disk (please wait)...Sau khi copy xong bạn sẽ thấy có 2 file mới đó là n3000-uk9.6.0.2.U6.3a.bin và n3000-uk9-kickstart.6.0.2.U6.3a.bin trong bootflash.
matbaoCA-sw01# dir bootflash:
4096 Mar 07 07:01:45 2018 .patch/
0 Oct 10 08:49:51 2022 20221010_084951_poap_3972_init.log
0 Oct 11 05:51:44 2022 20221011_055144_poap_3937_init.log
0 Nov 14 03:08:03 2022 20221114_030803_poap_3936_init.log
0 Nov 14 08:22:17 2022 20221114_082217_poap_3936_init.log
0 Nov 14 10:54:20 2022 20221114_105420_poap_3936_init.log
37853184 Nov 15 00:53:24 2022 n3000-uk9-kickstart.6.0.2.U6.3a.bin
37861376 Dec 21 12:35:13 2016 n3000-uk9-kickstart.6.0.2.U6.7.bin
206762702 Nov 15 00:54:09 2022 n3000-uk9.6.0.2.U6.3a.bin
205813793 Dec 22 04:50:28 2016 n3000-uk9.6.0.2.U6.7.bin
1024 Oct 10 08:48:50 2022 sprom_cstruct_2_0_0
1024 Oct 10 08:49:24 2022 sprom_cstruct_3_0_0
4096 Aug 18 15:21:43 2022 vdc_2/
4096 Aug 18 15:21:43 2022 vdc_3/
4096 Aug 18 15:21:43 2022 vdc_4/
4096 Aug 18 15:21:46 2022 virtual-instance/
Usage for bootflash://sup-local
616742912 bytes used
1236373504 bytes free
1853116416 bytes totalBây giờ bạn hãy sử dụng lệnh sau để tiến hành install BIOS và OS mới vào thiết bị.
install all system <image_file> <kickstart_file>Chạy lệnh và chờ trong ít phút để quá trình cài đặt được hoàn thành, lưu ý không nên để mất nguồn đột ngột vì nó rất nhạy cảm dễ bị hỏng và không boot được nữa.
matbaoCA-sw01# install all system n3000-uk9.6.0.2.U6.3a.bin kickstart n3000-uk9-kickstart.6.0.2.U6.3a.bin
Installer is forced disruptive
Verifying image bootflash:/n3000-uk9-kickstart.6.0.2.U6.3a.bin for boot variable "kickstart".
[########################################] 100% -- SUCCESS
Verifying image bootflash:/n3000-uk9.6.0.2.U6.3a.bin for boot variable "system".
[########################################] 100% -- SUCCESS
Verifying image type.
[########################################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n3000-uk9.6.0.2.U6.3a.bin.
[########################################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/n3000-uk9-kickstart.6.0.2.U6.3a.bin.
[########################################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/n3000-uk9.6.0.2.U6.3a.bin.
[########################################] 100% -- SUCCESS
Collecting "running" plugin(s) information.
[########################################] 100% -- SUCCESS
Collecting plugin(s) information from "new" image.
[########################################] 100% -- SUCCESS
Performing runtime checks.
[########################################] 100% -- SUCCESS
Performing module support checks.
[########################################] 100% -- SUCCESS
Notifying services about system upgrade.
[########################################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes disruptive reset Forced by the user
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------------- ---------------------- ---------------------- ------------
1 system 6.0(2)U6(7) 6.0(2)U6(3a) yes
1 kickstart 6.0(2)U6(7) 6.0(2)U6(3a) yes
1 bios v1.7.0(10/14/2013) v2.6.0(08/06/2014) yes
1 SFP-uC v2.12 v2.12 no
Switch will be reloaded for disruptive upgrade.
Do you want to continue with the installation (y/n)? [n] y
Time Stamp: Tue Nov 15 01:01:37 2022
Install is in progress, please wait.
Performing runtime checks.
[########################################] 100% -- SUCCESS
Setting boot variables.
[########################################] 100% -- SUCCESS
Performing configuration copy.
[########################################] 100% -- SUCCESS
Module 1: Refreshing compact flash and upgrading bios/loader/bootrom/power-seq.
Warning: please do not remove or power off the module at this time.
Note: Power-seq upgrade needs a power-cycle to take into effect.
On success of power-seq upgrade, SWITCH OFF THE POWER to the system and then, power it up.
[########################################] 100% -- SUCCESS
Converting startup config.
[########################################] 100% -- SUCCESS
Time Stamp: Tue Nov 15 01:07:44 2022
Finishing the upgrade, switch will reboot in 10 secondsNhư vậy là quá trình install BIOS và OS mới đã hoàn thành, thiết bị sẽ khởi động lại sau 10s. Sau khi khởi động xong bạn hãy login vào thiết bị và show boot nó lên, nếu cài đặt boot đang trống thì hãy thực hiện bước dưới. Trường hợp của mình cài đặt boot đang được cài đặt nên mình sẽ bỏ qua bước dưới.
matbaoCA-sw01# show boot
Current Boot Variables:
kickstart variable = bootflash:/n3000-uk9-kickstart.6.0.2.U6.3a.bin
system variable = bootflash:/n3000-uk9.6.0.2.U6.3a.bin
Boot POAP Disabled
Boot Variables on next reload:
kickstart variable = bootflash:/n3000-uk9-kickstart.6.0.2.U6.3a.bin
system variable = bootflash:/n3000-uk9.6.0.2.U6.3a.bin
Boot POAP DisabledNếu cài đặt boot đang trống thì hãy thực hiện bước này nhé.
boot kickstart bootflash:/n3000-uk9-kickstart.6.0.2.U6.3a.bin
boot system bootflash:/n3000-uk9.6.0.2.U6.3a.binBây giờ bạn hãy show version và chúng ta có kết quả.
matbaoCA-sw01# sh version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 2.6.0
loader: version N/A
kickstart: version 6.0(2)U6(3a)
system: version 6.0(2)U6(3a)
Power Sequencer Firmware:
Module 1: version v1.0
SFP uC: version 2.12
BIOS compile time: 08/06/2014
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U6.3a.bin
kickstart compile time: 2/14/2016 22:00:00 [02/15/2016 07:12:24]
system image file is: bootflash:///n3000-uk9.6.0.2.U6.3a.bin
system compile time: 2/14/2016 22:00:00 [02/15/2016 07:39:42]
Hardware
cisco Nexus 3064 Chassis ("48x10GE + 4x40G Supervisor")
Intel(R) Celeron(R) CPU P450 with 3665240 kB of memory.
Processor Board ID FOC18340FJ7
Device name: matbaoCA-sw01
bootflash: 30302208 kB
Kernel uptime is 0 day(s), 0 hour(s), 32 minute(s), 29 second(s)
Last reset at 820572 usecs after Tue Nov 15 01:07:54 2022
Reason: Disruptive upgrade
System version: 6.0(2)U6(7)
Service:
plugin
Core Plugin, Ethernet PluginSau khi hoàn thành hãy lưu lại config.
StorageCA-SW01# copy running-config startup-config
[########################################] 100%
Copy complete, now saving to disk (please wait)...
